Optimal trade entry, or OTE, is an ICT concept that narrows a pullback down to a precise area: the 62% to 79% Fibonacci retracement of a price swing. Instead of chasing a move or guessing where a retracement will end, you wait for price to reach a deep discount (for longs) or deep premium (for shorts) and then look for a trigger. This guide explains how to mark OTE, how to trade it, and how to journal it so you know if it really improves your results.
What Is Optimal Trade Entry (OTE)?
OTE is the zone between the 0.62 and 0.79 Fibonacci retracement levels, with 0.705 often used as the midpoint. It sits inside the deeper half of a premium or discount zone, which is why it is considered a high-value location: the stop can be tight, and the distance to the target is large.
62%
Start of the OTE zone
70.5%
Common midpoint
79%
End of the OTE zone
How to Mark OTE on a Chart
- 1Identify the higher-timeframe bias. OTE longs belong in a bullish context, OTE shorts in a bearish one.
- 2Find a clear impulse leg that broke structure, confirmed by a break of structure or change of character.
- 3For a long, draw the Fibonacci tool from the swing low to the swing high. For a short, draw it from the swing high to the swing low.
- 4Highlight the area between 0.62 and 0.79 as the OTE zone.
- 5Look for confluence inside the zone, such as a fair value gap or an order block.
- 6Wait for a lower-timeframe trigger before entering.
OTE Entry Checklist
| Step | Question | Pass condition |
|---|---|---|
| Bias | Is the higher timeframe aligned? | Trade direction matches the trend |
| Structure | Did the impulse break structure? | Clear BOS or CHoCH on the swing |
| Location | Is price inside 62% to 79%? | Entry sits in the OTE zone |
| Confluence | Is there an FVG or order block here? | At least one overlapping level |
| Trigger | Is there a lower-timeframe shift? | CHoCH or displacement candle |
| Risk | Is the setup at least 2R? | Stop beyond the swing, target at the prior extreme or beyond |
Example: A Long From OTE
Price rallies from 100 to 120 and breaks structure. It then retraces. The 62% level is 107.6 and the 79% level is 104.2. Price taps 105.5, forms a bullish fair value gap on the 5-minute chart, and you enter at 105.8 with a stop at 103.8, below the OTE zone and under the 79% level. The target is the prior high at 120 plus, which gives roughly 7R. That asymmetry is the whole point of OTE: a tight, well-located stop and a long runway.
Common OTE Mistakes
- Entering at the first touch of 0.62 without any trigger or confirmation.
- Drawing the Fibonacci on the wrong swing, which shifts the whole zone.
- Taking OTE trades against the higher-timeframe trend.
- Placing the stop inside the zone, where normal noise will hit it.
- Ignoring that price may blow through 0.79 when the impulse has failed. Respect a close beyond the stop.
- Never recording the trade, so you cannot tell if OTE is working for you.
OTE is a location, not a signal. The zone tells you where to look. Your trigger, your stop and your journal tell you whether to act.
How to Journal OTE Trades
A setup only becomes an edge once you have measured it. For each OTE trade, record the retracement depth you entered at, the timeframe, the confluence present, the trigger used, and the result in R. Use journal tags so you can filter later.
| Field | Example | What it reveals |
|---|---|---|
| Entry depth | 0.705 | Which part of the zone performs best |
| Confluence | FVG + order block | Whether extra confluence lifts win rate |
| Trigger | 5m CHoCH | Which trigger is most reliable |
| HTF bias | Aligned / against | Cost of trading against the trend |
| Result in R | +3.2R | Expectancy per depth and trigger |
After at least 30 trades, compare your expectancy for entries at 0.62, 0.705 and 0.79, and for trades with and without confluence. You may find that your edge lives in one narrow slice of the zone.
The best entry is not the one that looks perfect on a chart. It is the one your data says has positive expectancy.
TradeEdge lets you tag each trade by retracement depth, confluence and trigger, then compares R-multiples and expectancy per tag so you can keep the version of OTE that actually pays.