The Sterling ratio measures your annual return against your average yearly maximum drawdown, after adding a 10% buffer to that drawdown. A Sterling ratio above 1.0 is acceptable, above 2.0 is strong, and above 3.0 is excellent. It tells you how much return you earn for each unit of drawdown pain.
What Is the Sterling Ratio?
The Sterling ratio is a risk-adjusted return metric closely related to the Calmar ratio. Where Calmar divides return by a single worst drawdown, Sterling divides return by the average of the largest drawdown in each year, then adds 10 percentage points as a safety margin. That makes it more stable and less dependent on one bad event.
Sterling ratio = annualised return / (average annual max drawdown + 10%). The 10% is added to the drawdown figure, not to the return.
Sterling Ratio Formula and Worked Example
- 1Calculate your annualised return over the period.
- 2For each calendar year, record the maximum drawdown.
- 3Average those yearly maximum drawdowns.
- 4Add 10 percentage points to that average.
- 5Divide the annualised return by the adjusted drawdown.
Example: over three years you average a 24% annual return. Your yearly max drawdowns are 8%, 14% and 11%, an average of 11%. Add the 10% buffer to get 21%. Sterling ratio = 24 / 21 = 1.14. Without the buffer, the raw return-to-drawdown figure would be 2.18, which flatters the result.
Sterling Ratio Benchmarks
| Sterling ratio | Rating | What it usually means |
|---|---|---|
| Below 0.5 | Weak | Return does not justify the drawdowns you endure |
| 0.5 to 1.0 | Acceptable | Adequate but fragile in a bad year |
| 1.0 to 2.0 | Good | Solid return relative to drawdown risk |
| 2.0 to 3.0 | Strong | Disciplined, consistent performance |
| Above 3.0 | Excellent | Rare. Verify the sample size before trusting it |
10%
Buffer added to average drawdown
> 1.0
Minimum target for most traders
3+ yrs
Data ideal for a reliable reading
Sterling vs Calmar vs Sortino
| Ratio | Risk measure used | Best for |
|---|---|---|
| Sterling | Average yearly max drawdown + 10% | Smoothing out one-off bad years |
| [Calmar](/blog/what-is-a-good-calmar-ratio-in-trading-benchmarks-and-how-to-improve-it) | Single worst drawdown | Stress-testing worst-case pain |
| [Sortino](/blog/sortino-ratio-trading-explained-downside-risk) | Downside volatility | Penalising only harmful swings |
| [Sharpe](/blog/sharpe-ratio-trading-explained-risk-adjusted-returns) | Total volatility | General comparison across strategies |
Why the Sterling Ratio Matters
Volatility-based ratios can miss what really hurts: sustained equity declines. The Sterling ratio keeps the focus on drawdowns while avoiding the trap of judging a strategy by one outlier year. The buffer also stops a lucky year with a tiny drawdown from producing an absurdly high score.
How to Improve Your Sterling Ratio
- 1Lower the average yearly drawdown. Cap risk with a daily loss limit and a fixed percentage risk per trade.
- 2Cut your weakest setups. Remove trades with negative expectancy.
- 3Reduce correlated positions so one event cannot trigger a deep drawdown. See correlation risk.
- 4Improve exits. Review MAE and MFE to tighten stops and capture more profit.
- 5Trim costs from commissions and slippage.
Limitations
- It needs several years of data to average yearly drawdowns meaningfully.
- The fixed 10% buffer is a convention, not a law, and matters less for large drawdowns.
- It ignores drawdown length. Pair it with drawdown duration.
- Small samples can mislead. See how many trades you need.
TradeEdge calculates your equity curve and drawdowns from imported trades, so you can see yearly maximum drawdowns and compute your Sterling ratio without a spreadsheet.